المساعد الشخصي الرقمي

مشاهدة النسخة كاملة : What is a DEM (Digital Elevation Model



eslam mamdouh
10-02-2008, 11:56 AM
Digital Elevation Models are data files that contain the elevation of the terrain over a specified area, usually at a fixed grid interval over the surface of the earth. The intervals between each of the grid points will always be referenced to some geographical coordinate system. This is usually either latitude-longitude or UTM (Universal Transverse Mercator) coordinate systems. The closer together the grid points are located, the more detailed the information will be in the file. The details of the peaks and valleys in the terrain will be better modeled with a small grid spacing than when the grid intervals are very large. Elevations other than at the specific grid point locations are not contained in the file. As a result peak points and valley points not coincident with the grid will not be recorded in the file.
http://www.gis.usu.edu/~doug/RS5750/PastProj/FA1996/gis2/images/gis217.gif
The files can be in either ASCII or binary. In order to read the files directly you must know the exact format of the entire file layout. Usually the name of the file gives the reference location to some map corner point in the file. The files usually contain only the z value (elevation value) and do not contain the actual geographical location that is associated with that point. The actual location associated with that elevation data is calculated by software reading the actual DEM file, knowing the precise location of the data value inside the DEM file. In addition, there will be some needed reference information in the header (first part) of the file. When an elevation is calculated at locations other than the actual grid points, some method of interpolation from the known grid points is used. Again, this is done in software that is external to the actual DEM file.
http://www.ruraltech.org/gis/map_info/gis_overview/images/devils_bluff_3d.jpg

The DEM file also does not contain civil information such as roads or buildings. It is not a scanned image of the paper map (graphic). It is not a bitmap. The DEM does not contain elevation contours, only the specific elevation values at specific grid point locations.
http://thecadgeek.com/blog/wp-content/uploads/2007/09/fig-01.jpg

Some companies chose to encrypt their DEMs, thereby prohibiting you from making your own files, converting data from other sources or allowing you access to data files that were provided from anyone other than that software vendor. SoftWright maintains an open architecture on all our data files. Details for all DEM file formats that SoftWright supports are available to any of our customers.

http://www.sciencegl.com/multiple_layers/3d_radar_cut.jpg

eslam mamdouh
10-02-2008, 11:57 AM
وقريبا يتم اضافه الموضوع باللغه العربيه عن نماذج الارتفاعات الرقميه فى منتدى نظم المعلومات الجغرافيه


شكرا على متابعتكم

Rania Ismail
10-02-2008, 12:59 PM
بجد يا سولوم 100/100 بس يا ريت تبقى تترجم الموضع علشان الغلابه اللى زينا اللى اقدر اقوله انا الصور حلوه

eslam mamdouh
10-02-2008, 01:02 PM
ان شاء الله الموضوع هينزل بالعربى فى قسم نظم المعلومات الجغرافيه

على فكره حاولى تقرى الموضوع وتفهمى منه اى حاجه لانه مهم جدا فى شغل gis

على فكره انا مش فاهمه كله برضه انا فاهم اجزاء منه بس


وربنا يوفقك

Rania Ismail
10-02-2008, 01:08 PM
حاضر يا اسلام وان شاء الله لما ترجع بالسلامه لو فى حاجه مش فهمنها تبقى قولهالنا

eslam mamdouh
10-02-2008, 01:10 PM
متشكر جدا على دخولك وتشجيعك يا رنيا


وربنا يكرمكم

Mimi
10-02-2008, 10:28 PM
That was an Excellent surveying info Mr Eslam

About this I've read That American Surveyors usually use The Term DEM which includes only elevation
data that are generally not considered as terrain surface. In most cases DEM is grid data with elevation attributes, which is suitable to use for analyses in raster GIS

But Canadian Surveyors usually use The Term DTM which includes more general information than DEM

DTM is a modeled surface structure which contains also other data of terrain as following: ridgelines, peak points etc

So if u don't Mind Mr Eslam ..Could you Explain more the difference Between the both terms later in the Arabic Topic? and Thanks any way

eslam mamdouh
10-03-2008, 01:44 PM
shokran liky gidan alaa al adafa al kayma

eslam mamdouh
10-03-2008, 01:51 PM
but no different between DEM and DTM that mean Digital models of elevation
Arabic
In
يطلق عليها عده مسميات اولها نماذج الارتفاعات الرقميه Digital elevation models او يطلق عليها نموذج التضاريس الرقمى العددىDigital terrain Model او معلومات الارتفاعات الرقميه العدديه Digital terrain elevation Data . وغيرها من المسميات العديده ولكنها جميعا تشير الى شى واحد, تشير الى مجموعه من النقط موزعه الى سطح تضاريسى معين معلومه الاحداثيات والمنسوب بدقه , ومن خلالها يمكن بناء النماذج الرقميه التضاريسيه ثلاثيه الابعاد للمناطق المختلفه.

eslam mamdouh
10-03-2008, 01:53 PM
شكرا على مرورك الكريم ووفقك الله

احمد حسن
10-04-2008, 04:18 PM
thank you ESLAM MAMDOUH for this great information
but a wonderd
why the companies _ as you say _ hide there data if it allready found in the land grid and we get and create a huge numbers of mackets or model that help us to use this area easly