+ إنشاء موضوع جديد
صفحة 1 من 2 12 الأخيرةالأخيرة
النتائج 1 إلى 10 من 11
  1. #1
    Status
    Offline
    الصورة الرمزية eslam mamdouh
    عضو ملكى 100%
    تاريخ التسجيل
    Sep 2008
    العمر
    35
    المشاركات
    3,041
    معدل تقييم المستوى
    8834

    افتراضي What is a DEM (Digital Elevation Model

    Digital Elevation Models are data files that contain the elevation of the terrain over a specified area, usually at a fixed grid interval over the surface of the earth. The intervals between each of the grid points will always be referenced to some geographical coordinate system. This is usually either latitude-longitude or UTM (Universal Transverse Mercator) coordinate systems. The closer together the grid points are located, the more detailed the information will be in the file. The details of the peaks and valleys in the terrain will be better modeled with a small grid spacing than when the grid intervals are very large. Elevations other than at the specific grid point locations are not contained in the file. As a result peak points and valley points not coincident with the grid will not be recorded in the file.

    The files can be in either ASCII or binary. In order to read the files directly you must know the exact format of the entire file layout. Usually the name of the file gives the reference location to some map corner point in the file. The files usually contain only the z value (elevation value) and do not contain the actual geographical location that is associated with that point. The actual location associated with that elevation data is calculated by software reading the actual DEM file, knowing the precise location of the data value inside the DEM file. In addition, there will be some needed reference information in the header (first part) of the file. When an elevation is calculated at locations other than the actual grid points, some method of interpolation from the known grid points is used. Again, this is done in software that is external to the actual DEM file.


    The DEM file also does not contain civil information such as roads or buildings. It is not a scanned image of the paper map (graphic). It is not a bitmap. The DEM does not contain elevation contours, only the specific elevation values at specific grid point locations.


    Some companies chose to encrypt their DEMs, thereby prohibiting you from making your own files, converting data from other sources or allowing you access to data files that were provided from anyone other than that software vendor. SoftWright maintains an open architecture on all our data files. Details for all DEM file formats that SoftWright supports are available to any of our customers.




    مهندس / اسلام ممدوح ابوضيف

    مهندس مساحه تركيبات ميكانيكيه

    شركه T .Q .C

  2. #2
    Status
    Offline
    الصورة الرمزية eslam mamdouh
    عضو ملكى 100%
    تاريخ التسجيل
    Sep 2008
    العمر
    35
    المشاركات
    3,041
    معدل تقييم المستوى
    8834

    افتراضي

    وقريبا يتم اضافه الموضوع باللغه العربيه عن نماذج الارتفاعات الرقميه فى منتدى نظم المعلومات الجغرافيه


    شكرا على متابعتكم


    مهندس / اسلام ممدوح ابوضيف

    مهندس مساحه تركيبات ميكانيكيه

    شركه T .Q .C

  3. #3
    Status
    Offline
    الصورة الرمزية Rania Ismail
    عضو فضى 80%
    تاريخ التسجيل
    Sep 2008
    الدولة
    Egypt/Alex/ZeZenia
    العمر
    36
    المشاركات
    1,127
    معدل تقييم المستوى
    6802

    افتراضي

    بجد يا سولوم 100/100 بس يا ريت تبقى تترجم الموضع علشان الغلابه اللى زينا اللى اقدر اقوله انا الصور حلوه

  4. #4
    Status
    Offline
    الصورة الرمزية eslam mamdouh
    عضو ملكى 100%
    تاريخ التسجيل
    Sep 2008
    العمر
    35
    المشاركات
    3,041
    معدل تقييم المستوى
    8834

    افتراضي

    ان شاء الله الموضوع هينزل بالعربى فى قسم نظم المعلومات الجغرافيه

    على فكره حاولى تقرى الموضوع وتفهمى منه اى حاجه لانه مهم جدا فى شغل gis

    على فكره انا مش فاهمه كله برضه انا فاهم اجزاء منه بس


    وربنا يوفقك


    مهندس / اسلام ممدوح ابوضيف

    مهندس مساحه تركيبات ميكانيكيه

    شركه T .Q .C

  5. #5
    Status
    Offline
    الصورة الرمزية Rania Ismail
    عضو فضى 80%
    تاريخ التسجيل
    Sep 2008
    الدولة
    Egypt/Alex/ZeZenia
    العمر
    36
    المشاركات
    1,127
    معدل تقييم المستوى
    6802

    افتراضي

    حاضر يا اسلام وان شاء الله لما ترجع بالسلامه لو فى حاجه مش فهمنها تبقى قولهالنا

  6. #6
    Status
    Offline
    الصورة الرمزية eslam mamdouh
    عضو ملكى 100%
    تاريخ التسجيل
    Sep 2008
    العمر
    35
    المشاركات
    3,041
    معدل تقييم المستوى
    8834

    افتراضي

    متشكر جدا على دخولك وتشجيعك يا رنيا


    وربنا يكرمكم


    مهندس / اسلام ممدوح ابوضيف

    مهندس مساحه تركيبات ميكانيكيه

    شركه T .Q .C

  7. #7
    Status
    Offline
    الصورة الرمزية Mimi
    مهندسه معمارية
    تاريخ التسجيل
    Sep 2008
    الدولة
    Egypt
    العمر
    37
    المشاركات
    1,687
    معدل تقييم المستوى
    7376

    افتراضي

    That was an Excellent surveying info Mr Eslam

    About this I've read That American Surveyors usually use The Term DEM which includes only elevation
    data that are generally not considered as terrain surface. In most cases DEM is grid data with elevation attributes, which is suitable to use for analyses in raster GIS

    But Canadian Surveyors usually use The Term DTM which includes more general information than DEM

    DTM is a modeled surface structure which contains also other data of terrain as following: ridgelines, peak points etc

    So if u don't Mind Mr Eslam ..Could you Explain more the difference Between the both terms later in the Arabic Topic? and Thanks any way
    التعديل الأخير تم بواسطة Mimi ; 10-02-2008 الساعة 10:32 PM

  8. #8
    Status
    Offline
    الصورة الرمزية eslam mamdouh
    عضو ملكى 100%
    تاريخ التسجيل
    Sep 2008
    العمر
    35
    المشاركات
    3,041
    معدل تقييم المستوى
    8834

    افتراضي

    shokran liky gidan alaa al adafa al kayma


    مهندس / اسلام ممدوح ابوضيف

    مهندس مساحه تركيبات ميكانيكيه

    شركه T .Q .C

  9. #9
    Status
    Offline
    الصورة الرمزية eslam mamdouh
    عضو ملكى 100%
    تاريخ التسجيل
    Sep 2008
    العمر
    35
    المشاركات
    3,041
    معدل تقييم المستوى
    8834

    افتراضي

    but no different between DEM and DTM that mean Digital models of elevation
    Arabic
    In
    يطلق عليها عده مسميات اولها نماذج الارتفاعات الرقميه Digital elevation models او يطلق عليها نموذج التضاريس الرقمى العددىDigital terrain Model او معلومات الارتفاعات الرقميه العدديه Digital terrain elevation Data . وغيرها من المسميات العديده ولكنها جميعا تشير الى شى واحد, تشير الى مجموعه من النقط موزعه الى سطح تضاريسى معين معلومه الاحداثيات والمنسوب بدقه , ومن خلالها يمكن بناء النماذج الرقميه التضاريسيه ثلاثيه الابعاد للمناطق المختلفه.


    مهندس / اسلام ممدوح ابوضيف

    مهندس مساحه تركيبات ميكانيكيه

    شركه T .Q .C

  10. #10
    Status
    Offline
    الصورة الرمزية eslam mamdouh
    عضو ملكى 100%
    تاريخ التسجيل
    Sep 2008
    العمر
    35
    المشاركات
    3,041
    معدل تقييم المستوى
    8834

    افتراضي

    شكرا على مرورك الكريم ووفقك الله


    مهندس / اسلام ممدوح ابوضيف

    مهندس مساحه تركيبات ميكانيكيه

    شركه T .Q .C

صفحة 1 من 2 12 الأخيرةالأخيرة

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •